Product List
Brief DescriptionThe R&S®FSU is a high-performance spectrum analyzer with outstanding performance in phase noise, dynamic range and measurement accuracy that meets any challenge in RF analysis – in aerospace and defense or for general microwave applications up to 67 GHz.To handle the wide variety of measurement tasks in product development, an instrument must offer ample functionality and excellent performance in all areas of interest. The R&S®FSU fully meets these requirements.Its wide dynamic range makes the R&S®FSU an ideal tool for base station development and testing. That plus the excellent characteristics already incorporated in the standard model, e.g.Key Facts3.6/8/26/43/46/50/67 GHzTOI 20 dBm, typ. +25 dBm1 dB compression: +13 dBm (0 dB RF at...
The LitePoint® IQxel-M8™ is the ideal solution for high-volume production environments enabling testing of numerous connectivity standards including:Wi-Fi, 802.11a/ac/ah/b/g/j/n/pBluetooth, Classic (1.x, 2.x, 3.0), Low Energy (BLE) (4.0, 4.1, 4.2), and Bluetooth 5Supports 2x2 true MIMO with single testerSupports up to 8x8 true MIMO by stacking multiple testersZigBeeWi-SUNDECTTD-LTEOver 500% Test Throughput Increase with Testing of up to 4 Devices in ParallelThe IQxel-M8 can perform parallel tests on up to eight devices simultaneously through its fully-integrated RF ports. With the IQxel-M8’s embedded intelligent scheduling capability you can realize throughput increases greater than 500% relative to single-device systems.The IQxel-M8 supports 2x2 true MIMO testing in a single tes...
DescriptionThe Keysight Mobile Communications DC Source 663xx series offers several features ideal for testing wireless and battery powered devices. Excellent voltage transient response ensures maximum test-system throughput by minimizing device shutdowns due to significant voltage drops in the test wiring. Built-in advanced measurement system to accurately measure battery current drains when the device operates in different modes and a Keysight-developed feature that enables cellular telephone manufacturers to detect permanently and intermittently open-sense wire connections.
The Spirent GSS6100 is designed specifically for high volume manufacturing test applications for devices that include a GPS L1 C/A code receiver. For many applications, a single channel GPS signal simulator is the preferred way to ensure that each device produced meets defined parameters. While multi-channel GPS testing is essential during R&D, integration and verification testing, in a manufacturing environment many applications prefer a single channel to stimulate the receiver in a test mode. Controlled GPS testing in this way assures correct assembly and verifies expected performance parameters, typically C/No within a specified range for a given RF input power level.
High Speed Power Supply w/ Precision Readback15 V / 3 A or 9 V / 5 A, 45 WOptimized for battery-powered device testingUltra-fast transient response to load changes5 A continuous outputPulse peak, average, and baseline current measurements100 nA DC current sensitivity45 W output (15 V at 3 A, 9 V at 5 A)Sinks up to 2 A
Single box that supports multi-system:* GSM/GPRS/EDGE: Supports multi-slot, SMS, and all valid bands (P/E/R-GSM, DCS, PCS, and GSM 850MHz). * W-CDMA: HSDPA. * CDMA2000/EVDO
The MT8815A is the fastest and most accurate mobile phone tester for repair applications, and the only tester that supports all popular 2G, 2.5G, and 3G technologies in one unit, including a scalable platform providing investment protection by allowing installation of new wireless formats.
The GigaTronics 8651A Universal Power Meter has the extensive measurement capabilities and features you need to test todays sophisticated communications systems faster, easier and more accurately. The 8651A can measure the CW power, peak power and average power of TDMA, GSM, and CDMA (both IS-95 and third-generation 10 MHz wide band) signals. CW measurement speeds (readings/second) over GPIB are 1,750 and modulated measurement speeds are 300. And the Gigatronics 8651A includes many time saving features such as automatic time gate setting, direct crest factor measurement, and statistical power measurement analysis.
Signal analysis capabilities with up to 80 MHz analysis bandwidth, +/-0.19 dB absolute amplitude accuracy, -155 dBm DANL, -118 dBc/Hz phase noise at 10 kHz offset, and 81 dB W-CDMA ACLR dynamic rangeAddress application-specific requirements with capabilities including 16 measurement personalities and one-button measurement simplicity