Product List
The LitePoint® IQxel-M8™ is the ideal solution for high-volume production environments enabling testing of numerous connectivity standards including:Wi-Fi, 802.11a/ac/ah/b/g/j/n/pBluetooth, Classic (1.x, 2.x, 3.0), Low Energy (BLE) (4.0, 4.1, 4.2), and Bluetooth 5Supports 2x2 true MIMO with single testerSupports up to 8x8 true MIMO by stacking multiple testersZigBeeWi-SUNDECTTD-LTEOver 500% Test Throughput Increase with Testing of up to 4 Devices in ParallelThe IQxel-M8 can perform parallel tests on up to eight devices simultaneously through its fully-integrated RF ports. With the IQxel-M8’s embedded intelligent scheduling capability you can realize throughput increases greater than 500% relative to single-device systems.The IQxel-M8 supports 2x2 true MIMO testing in a single tes...
Single box that supports multi-system:* GSM/GPRS/EDGE: Supports multi-slot, SMS, and all valid bands (P/E/R-GSM, DCS, PCS, and GSM 850MHz). * W-CDMA: HSDPA. * CDMA2000/EVDO
The MT8815A is the fastest and most accurate mobile phone tester for repair applications, and the only tester that supports all popular 2G, 2.5G, and 3G technologies in one unit, including a scalable platform providing investment protection by allowing installation of new wireless formats.
The E5515C hardware platform for the 8960 wireless communications test set is the world’s most trusted solution for wireless device manufacturing and RF design and verification.The proven 8960 test applications, developed for high-volume, automated wireless device manufacturing test, offer speed, accuracy, repeatability, and ease of programming, all on the format-flexible E5515C architecture. For the mobile manufacturer, this translates into lower test costs and higher production output to help meet customer demand for phones now and into the future.The 8960’s flexible, accurate and fast RF measurements, coupled with a fully flexible yet easy-to-use network emulator help you design, integrate and verify your RF devices faster. Add the full-featured wireless test manager (WTM) software for ...
The MT8820C Radio Communication Analyzer platform covers 30 MHz to 2.7 GHz (3.4 GHz to 3.8 GHz valid only if MT8820C-018 is installed). Installing dedicated software and optional hardware supports evaluation of key TRx characteristics for LTE-Advanced FDD DL CA, LTE FDD/TDD, W-CDMA/HSPA/HSPA Evolution, CDMA2000 1X/1xEV-DO, TD-SCDMA/TD-SCDMA HSPA, GSM/GPRS/EGPRS, and PHS/ADVANCED PHS mobile terminals.By installing 2G/3G/3.5G dedicated measurement hardware and software in the main frame, one MT8820C supports high-speed batch measurements of RF TRx characteristics and call connection tests for 2G/3G/3.5G mobile terminals. In addition, installing the MX882012C/13C supports RF TRx tests required for manufacturing LTE FDD/TDD mobile terminals and data cards. The MX882012C/13C supports ...
The MT8820B Radio Communication Analyzer is a multi-system test platform that covers W-CDMA/HSPA, GSM/GPRS/EGPRS, cdma2000® 1x/1xEV-DO, and TD-SCDMA with just 1 unit. This platform supports detailed failure diagnosis and evaluation of all the main mobile device transmission/reception test items.The MT8820B platform covers a frequency range of 30 MHz to 2.7 GHz. When optional measurement software and hardware is installed, the major Tx and Rx characteristics of W-CDMA/HSPA, GSM/GPRS/EGPRS, CDMA2000® 1X, CDMA2000 1xEV-DO Rev.A, and TD-SCDMA wireless devices can be measured using a single MT8820B unit.In the MT8820B, manufacturing and inspection test times have been dramatically cut by incorporating advanced DSP and parallel-measurement technologies. Furthermore, several m...
Rohde & Schwarz CMW500 2 Channels Non-Signalling All-in-one test platform for wireless devicesWireless standards and broadcast technologies, e.g. LTE (incl. MIMO), WLAN or DVB-T and associated inter-RAT messagesAll phases of development, verification and productionAll protocol layers, from RF tests and protocol tests to end-to-end application tests
The R&S® CMU200 Universal Radio Communication Tester is a third-generation platform design that offers true scalable multimode functionality.The base unit with its standard-independent module test provides any general purpose measurement facilities for the development of all kinds of standards within its wide and continuous frequency range. If extended by the appropriate options, the CMU200 offers the hardware and software necessary to handle your 3G, 2.5G and previous generation testing applications, including analog.
The R&S® CMW280 is the compact version of the R&S®CMW500 and has 20 % less depth. The instrument can be configured exclusively as a single tester and requires only minimum floor space in classic test concepts.